Description

D-Link DGS-F1010P-E 250M 10-Port 1000Mbps Switch with 8 PoE Ports and 2 Uplink Ports

Eight PoE devices. One switch. Power and data stretching up to 250 metres. The D-Link DGS-F1010P-E 250M PoE Gigabit switch is built for surveillance, wireless coverage, and growing small business networks that need reliable long-range PoE connectivity — without complex configuration or extra power infrastructure.


Product Details

The D-Link DGS-F1010P-E is a 10-port Gigabit PoE switch with eight PoE+ ports and two dedicated Gigabit uplink ports. All eight PoE ports support IEEE 802.3af and 802.3at standards, delivering a massive 120W total PoE power budget — enough to simultaneously power eight Gigabit PoE devices including IP cameras, wireless access points, and VoIP phones. PoE Extend mode pushes power and data up to 250 metres over Cat5e or Cat6 cable — more than doubling the standard 100-metre limit. Built-in 6KV lightning surge protection guards every port against electrical damage, making it safe for outdoor and elevated device installations. Four DIP switch-controlled operating modes — Extend, VLAN, QoS, and PoE Watchdog — give users smart network control without a management interface. Setup is fully plug-and-play with no configuration required.

Browse the full range of networking switches at Plugtech Hub for the right PoE switch for your setup.


Technical Specifications

  • Total Ports: 10 (8 PoE+ Gigabit + 2 Gigabit Uplink)
  • PoE Ports: 8 x 10/100/1000 Mbps (IEEE 802.3af/at) — Ports 1–8
  • Uplink Ports: 2 x 10/100/1000 Mbps — Ports 9–10
  • Total PoE Budget: 120W
  • PoE Extend Range: Up to 250 metres at 10 Mbps (Cat5e/Cat6)
  • Switching Capacity: 20 Gbps (non-blocking)
  • Lightning Protection: 6KV surge protection — all ports
  • Flow Control: IEEE 802.3x
  • Auto MDI/MDIX: Yes — all ports
  • Operating Modes (DIP Switch): Extend, VLAN, QoS, PoE Watchdog
  • Transmission Method: Store-and-forward
  • Operating Temperature: 0°C to 40°C
  • Housing: Fanless compact desktop
  • Cable Support: Cat5e or Cat6 UTP
  • Compliance: IEEE 802.3af/at, RoHS
  • Installation: Plug-and-play — zero configuration

D-Link DGS-F1010P-E 250M PoE Gigabit Switch: Why It Stands Out

D-Link DGS-F1010P-E 250M PoE Gigabit Switch Reaches Where Others Cannot

Standard PoE switches deliver power only up to 100 metres. That is simply not enough for large compounds, school campuses, warehouses, or perimeter surveillance installations across Kenya. The DGS-F1010P-E’s Extend mode doubles that limit — pushing full PoE power and Gigabit data up to 250 metres over standard cabling. Eight PoE ports operating at this range means you can power and connect eight remote cameras or access points from a single switch, without a single extra power outlet, power injector, or cable pull at the device end.

Explore the full networking solutions at Plugtech Hub to build a complete long-range PoE network.

D-Link DGS-F1010P-E 250M PoE Gigabit Switch Delivers 120W of PoE Power

With a total PoE budget of 120W and support for up to 30W per port, this switch handles high-demand PoE devices without power shortfalls. IP cameras with pan-tilt-zoom motors, dual-band wireless access points, and PoE-powered VoIP phones all draw significant power — and this switch delivers consistently across all eight ports simultaneously. The auto-detection feature identifies each connected device’s power requirements and supplies exactly what is needed — preventing over-supply and protecting both the switch and the powered device.

Discover the full range of networking routers and accessories at Plugtech Hub to build a complete network.

D-Link DGS-F1010P-E 250M PoE Gigabit Switch Is Built for Kenya’s Outdoor Conditions

Outdoor PoE installations — rooftop cameras, elevated access points, perimeter fencing intercoms — are constantly exposed to lightning risk and voltage fluctuations. The DGS-F1010P-E’s 6KV surge protection on all ports actively shields connected equipment against sudden electrical surges. The fanless housing operates silently with no moving parts, reducing failure risk in dusty or humid environments. The DIP switch-controlled PoE Watchdog automatically detects and power-cycles unresponsive devices — keeping surveillance cameras and access points online without manual reboots.

Browse computer accessories at Plugtech Hub to complete your office or outdoor tech setup.


Who Uses This Switch

CCTV and Surveillance Installers — Security professionals deploying IP camera networks across large properties, warehouses, and gated estates use the 250-metre PoE Extend mode to reach every camera position without additional power infrastructure at each location.

ISPs and Wireless Network Operators — Internet service providers mounting access points on poles, rooftops, and elevated structures use this switch to power remote equipment over long cable runs from a protected indoor switch location.

Schools and Institutional Campuses — IT teams deploying wireless access points across multi-building school campuses use the extended PoE range and VLAN isolation to cover large areas from a single switch without additional cabling costs.

Small Offices and Retail Businesses — Growing offices and retail shops expanding their wired and wireless network use the DGS-F1010P-E to power access points, IP phones, and cameras simultaneously from one compact, plug-and-play unit.

Visit the Plugtech Hub shop to browse the full range of PoE switches and networking products available in Kenya.


Why Buy from Plugtech Hub

Plugtech Hub is Nairobi’s trusted technology store at World Business Centre, Tom Mboya Street. Every product is backed by a 7-day return policy, secure M-Pesa payment, and fast Kenya-wide delivery. The team is available daily from 8am to 6pm. Reach them at info@plugtechhub.co.ke or call +254793712331. Order today at plugtechhub.co.ke.

Reviews (0)

Ratings

0.0

0 Product Ratings
5
0
4
0
3
0
2
0
1
0

Review this product

Share your thoughts with other customers

Write a review

Reviews

There are no reviews yet.